Home  »  Technical, Mechanical, & Engineering   »   Artificial Lift Systems : Design And Optimization

Technical, Mechanical, & Engineering Yogyakarta

Artificial Lift Systems : Design And Optimization

Instructor by : Sudjati Rahmat

DESKRIPSI

Artificial lift refers to the use of artificial means to increase the flow of liquids, such as crude oil or water, from a production well. Generally this is achieved by the use of a mechanical device inside the well (known as pump or velocity string) or by decreasing the weight of the hydrostatic column by injecting gas into the liquid some distance down the well. Artificial lift is needed in wells when there is insufficient pressure in the reservoir to lift the produced fluids to the surface, but often used in naturally flowing wells (which do not technically need it) to increase the flow rate above what would flow naturally. The produced fluid can be oil, water or a mix of oil and water, typically mixed with some amount of gas.

Operators need artificial-lift and field-operation management systems that are designed specifically for their asset to achieve optimal production. Realizing the full potential of an artificially lifted well involves more than installation, control, and analysis. It requires the systematic design of the artificial lift system (ALS) coupled with a comprehensive, collaborative approach to managing field operations.

OUTLINE MATERI Training Artificial Lift Systems : Design And Optimization

1. Well Performance: Inflow and Outflow Relationships
2. Overview of Artificial Lift Technology
3. Artificial Lift Screening
4. Artificial Lift Design, Installation and Operation
5. Beam Pump
6. Electric Submersible Pump
7. Progressing Cavity Pump
8. Hydraulic Pump
9. Plunger Lift
10. Gas Lift
11. Deliquifying Gas Well Techniques (velocity strings, compression systems, foaming)
12. Criteria for Selection of Artificial Lift Systems
13. Best Practices for Design, Installation and Operation
14. Understanding production systems
15. The role of artificial lift in optimizing production
16. Analysis and trouble shooting of continuous-flow gas lift systems
17. The ESP, with detailed pump, motor, cable and shroud designs
18. Handling of gas and solids

PARTICIPANT

This course is for engineers who are involved in oil production and the design, maintenance and optimization of artificial lift, especially electrical submersible pump and continuous-flow gas lift systems.

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

FACILITIES

Training Kit

Handout

Certificate

Lunch + 2 X Coffee Break

Souvenir

Pick Up Participants (Yogyakarta)

TRAINING FEE for Artificial Lift Systems : Design And Optimization

Rp8.000.000, – / peserta / Non Residential

*minimal running (3 orang)

Form Pre-Registrasi

	Data Materi Training
Topik Training	: Artificial Lift Systems : Design And Optimization
Link
*Jumlah Peserta	Estimasi Jumlah Peserta yang di ajukan
*Nama Peserta Yang Didaftarkan
	Personal Data
*Nama
*Jabatan	Jabatan/Divisi/Departement
*Nama Perusahaan
*Alamat Perusahaan
*Email Perusahaan
*Email Alternatif	eg: gmail, yahoo, hotmail
*Telepon Kantor
Ekstensi
*Handphone
	* Harus di isi