Home  »  Bandung   »   Lubrication and Sealing System

Bandung Technical, Mechanical, & Engineering

Lubrication and Sealing System

Instructor by : Gregorius Harjanto

DESCRIPTION

Lubrication is the process or technique employed to reduce friction between, and wear of one or both, surfaces in proximity and moving relative to each other, by interposing a substance called a lubricant in between them. The lubricant can be a solid, (e.g. Molybdenum disulfide MoS2) a solid/liquid dispersion, a liquid such as oil or water, a liquid-liquid dispersion (a grease) or a gas. With fluid lubricants the applied load is either carried by pressure generated within the liquid the due to the frictional viscous resistance to motion of the lubricating fluid between the surfaces, or by the liquid being pumped under pressure between the surfaces.This course have objectives :

1. Lubrication methods that dramatically increase mean-time-between-failure
2. How to correctly manage lubricants in reservoirs and sumps
3. How to write dependable equipment lubrication procedures
4. Downtime reduction strategies that won’t break the bank
5. How to select the right lubricant for your application
6. The truth about aftermarket additives and oil conditioners
7. How to optimize lubricant storage and handling procedures
8. When to select grease or oil as the lubricant of choice

OUTLINE

Lubrication

• How Lubrication Affects Machine Reliability
• Lubrication Fundamentals
• Understanding Additives, Base Oils and Grease Thickeners
• Lubricant Performance Properties
• Food-grade and Environmentally-friendly Lubricants
• Lubricating Grease Application Methods
• Lubricating Oil Application Methods
• Selecting Lubricants
• Contamination Control
• Oil Drains, Flushing, and Reservoir Management
• Storage, Handling, and Managing Lubricants
• Design and Inspect for Lube Excellence
• Used Oil Analysis Basics
• Essential Field Inspections
• The Role of Lubrication in Machine Reliability
• Lubrication Fundamentals
• The Value of Base Oils and Grease Thickeners
• Lubricant Performance Properties
• Food-grade and Environmentally Friendly Lubricants
• Lubricant Degradation
• Accessorizing New Equipment for Lubrication Excellence
• Oil Drains, Flushing, and Reservoir Management
• New Lubricants
• Lubrication PM Optimization and Design
• Leakage Stability
• Advanced Lubricant Selection and Application
• Troubleshooting Lubrication Problems
• Lubrication and Oil Analysis Metrics

Seal System

• Design Requirement
• Seal Gas Supply
• Seal Gas Supply Controls
• Dry Gas Seal Primary Vent
• Dry Gas Seal Secondary Vent
• Enrichment line
• Alarm, Interlock, Conditions
• Transient Operations/Start Up
• Gas System Failures & Troubleshooting

PARTICIPANT

Operator, technician, supervisor, engineer etc

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

FACILITY

Training Kit

Handout

Certificate

Lunch

2 X Coffee Break

Souvenir

TRAINING FEE for Lubrication and Sealing System

Rp 7.500.000,- / peserta / non recidential

Minimal running 3 orang

Form Pre-Registrasi

	Data Materi Training
Topik Training	: Lubrication and Sealing System
Link
*Jumlah Peserta	Estimasi Jumlah Peserta yang di ajukan
*Nama Peserta Yang Didaftarkan
	Personal Data
*Nama
*Jabatan	Jabatan/Divisi/Departement
*Nama Perusahaan
*Alamat Perusahaan
*Email Perusahaan
*Email Alternatif	eg: gmail, yahoo, hotmail
*Telepon Kantor
Ekstensi
*Handphone
	* Harus di isi