Portal Jadwal Training & Consulting, Sertifikasi dan Non-Sertifikasi

Piping And Pipeline Management System

February 5, 2014
Piping And Pipeline Management System

Jadwal Pelatihan Piping And Pipeline Management System

TanggalTempatKota
Belum ada jadwal terbaru

Instructor by: Saripudin, St. Mt

 

Objectives

  1. The Participant will gain an in-depth knowledge of pipe and fitting material specifications, manufacturing, fabrication process and their influence on mechanical properties of strength and toughness, to help in material selection and failure analysis.
  2. The participant will understand the technical background to the design formulas, and their application to the design of piping systems and pipelines. The course addresses rules of good practice in layout of piping systems for reliable operation.
  3. The participant will gain a practical understanding of piping and pipeline mode of failure, corrosion mechanisms, how to recognize them, classify them and resolve them.
  4. The participant will learn risk assessment for piping & pipeline i.e. probability of failure and their consequences if failures occur.

 

Course Contents

Introduction

  1. History of Pipeline Technology
  2. Fundamentals of Maintenance and Integrity

 

Materials Selection

  • Metallurgical Properties
  • Chemistry and Material
  • Linepipe manufacturing
  • Fabrication and Fittings specification
  • Mechanical Properties: Strength and Toughness
  • Material selection technique

 

Strength Integrity for Sustained Loads

  • Operating and Design Pressure
  • How to Establish the System Design Pressure
  • Introduction to Pressure Relief Valves
  • Pipe and Pipeline Sizing Formula with Applications
  • Rules of Good Practice in layout
  • Pump and Compressor Piping
  • How to Support a piping System
  • Review of Support Types and their Application
  • Lesson learned from Poor Support Practices
  • Temperature Effects
  • Flexibility Layout Analysis
  • Temperature Transients and Fatigue Damage
  • Vibration In Service
  • Mechanical and Hydraulic Induced Vibration in Piping
  • How to Measure Analyze Resolve Vibration

 

Strength Integrity for Occasional Loads

  • Pressure Transients
  • Recognizing and Solving Liquid Hammer
  • Pump Station Transients
  • Study of Pipeline Failures Due to Transient
  • Two-Phase Liquid -Vapor Transients
  • Two-Phase Liquid-Gas Transients
  • Gas Discharge Transients
  • Buried Pipe
  • Soil Loads
  • Surface Loads
  • Expansion of Buried Pipe
  • Soil settlement
  • n-service Movement of Pipeline
  • Pipeline Failures
  • Understanding Why Failures Occur and How to Avoid Them

 

Corrosion Assessment and Protection

  • Introduction to Practical Corrosion
  • Classification of Corrosion Mechanisms
  • General Wall Thinning
  • Local Corrosion: Galvanic Effects
  • Crevice Corrosion
  • Pitting Corrosion
  • Environmental Effects
  • Hydrogen and H2S Effects
  • Microbiological Corrosion
  • Corrosion Protection
  • Cathodic Protection Overview

 

Corrosion Assessment and Protection

  • Introduction to Practical Corrosion
  • Classification of Corrosion Mechanisms
  • General Wall Thinning
  • Local Corrosion: Galvanic Effects
  • Crevice Corrosion
  • Pitting Corrosion
  • Environmental Effects
  • Hydrogen and H2S Effects
  • Microbiological Corrosion
  • Corrosion Protection
  • Cathodic Protection

 

Risk Assessment Overview

  • Introduction to risk assessment
  • Risk Criteria
  • Probability of failure
  • Third party damage
  • Corrosion aspects
  • Design aspects
  • Incorrect operation
  • Consequence of failure
  • Product hazard
  • Spill assessment
  • Dispersion calculation
  • Receptors
  • Risk Representation

 

Maintenance & repair

Flange and Mechanical Joints

  • Overview of Different Types of Flanges and Application
  • Causes of Flange Leaks and How to Resolve
  • Case Study of Flange Failure
  • Assembly of Flange Joints and Leak Tightness
  • Pressure and Leak Testing
  • The Difference Between Leak Testing and Pressure Testing
  • Review of Difference Testing Techniques
  • The Purpose of Hydro test
  • How to Conduct a Hydro test
  • Pipeline and Piping Systems Testing
  • Pneumatic Testing
  • Repair Techniques
  • The New ASME Repair Standards
  • The Fundamentals of Repair package
  • Pipe and Component Replacement
  • Grinding and welding
  • Welded Sleeve: Type A andB

 

Who Should Attend

Plant engineers in mechanical reliability programs, structure integrity, plant inspectors, central engineering staff, and consultants for refining and petrochemicals. Piping & Pipeline Integrity Management System with ASME 3.1 can also be beneficial for the pulp, paper, fossil fuel utility, and other industries that use and maintain the piping and pipeline integrity system.

 

TRAINING METHOD

Presentation

Discussion

Case Study

Evaluation

 

FACILITIES

Training Kit

Handout

Certificate

Lunch + 2 X Coffee Break

Souvenir

Pick Up Participants (Yogyakarta)

 

TRAINING FEE for Piping And Pipeline Management System

Rp6.500.000,-/ peserta/Non Residential

Minimal 3 peserta

Form Pre-Registrasi

Data Materi Training

Topik Training : Piping And Pipeline Management System
Link
*Jumlah Peserta Estimasi Jumlah Peserta yang di ajukan
*Nama Peserta Yang Didaftarkan

Personal Data

*Nama
*Jabatan Jabatan/Divisi/Departement
*Nama Perusahaan
*Alamat Perusahaan
*Email Perusahaan
*Email Alternatif eg: gmail, yahoo, hotmail
*Telepon Kantor
Ekstensi
*Handphone
* Harus di isi