Portal Jadwal Training & Consulting, Sertifikasi dan Non-Sertifikasi

Field Instruments

February 13, 2020

Field Instruments

Jadwal Pelatihan Field Instruments

Belum ada jadwal terbaru



An instrument is a device that measures a physical quantity such as Flow, Temperature, Level, Pressure, Distance and Angle. Instruments may be as simple as direct reading thermometer or may be complex multi-variable process analyzers. Instruments are often part of a control system in refineries, factories, and vehicles. The control of processes is one of the main branches of applied instrumentation. Instrumentation can also refer to handheld devices that measure some desired variable. Diverse handheld instrumentation is common in laboratories, but can be found in the household as well. For example, a smoke detector is a common instrument found in most western homes.

Instruments attached to a control system may provide signals used to operate solenoids, valves, regulators, circuit breakers or relays. These devices control a desired output variable, and provide either remote or automated control capabilities. These are often referred to as final control elements when controlled remotely or by a control systems.

A Transmitter is a device that produces an output signal, often in the form of a 4–20 mA electrical current signal, although many other options using voltage, frequency, pressure are possible. This signal can be used for informational purposes, or it can be sent to a PLC, DCS, SCADA, ESD/SIS, FGS System, or other type of computerized controller, where it can be interpreted into readable values and used to control other devices and processes in the system.

A valve is a device for Controlling the passage of fluid/pressure/level through a Pipe or Duct/Tank,especially an automatic device allowing movement in one direction. Two type of valve’s are used in industries,

  • Control Valve
  • On/Off Valve.

Control instrumentation plays a significant role in both gathering information from the field and changing the field parameters, and as such are a key part of control loops.



  1. Field Instruments Introduction
  2. Field Instruments Overview
  3. Field Instruments Types
  4. Pressure Transmitters Configuration
  5. Flow Transmitters Configuration
  6. Temperature Transmitters Configuration
  7. Level Transmitters Configuration
  8. Control Valve Configuration
  9. On/Off Valve Configuration
  10. Conventional Type Transmitter
  11. Wireless Transmitters Overview
  12. Field Instruments Selection
  13. Wireless Transmitters Configuration
  14. Field Instruments Calibrations
  15. Field Instruments Range Changing
  16. 375 Filed Communicator Overview
  17. 375 Filed Communicator Configuration
  18. I/O List Generation from Field Instruments
  19. Filed instruments Integrated with DCS/PLC Systems
  20. Field Instruments Identify from P&ID Diagrams
  21. HART Type Transmitters and Control Valves
  22. Field Bus Type Transmitters and Control Valves
  23. Field Instruments Calibration from DCS and Marshaling Panel
  24. 2-Wire/3-Wire Transmitter Overview and Configuration
  25. ESD/SIS Valve Overview





Case Study




Training Kit



Lunch + 2x Coffee Break


Pick Up Participants (Yogyakarta)


TRAINING FEE for Field Instruments

Rp7.500.000,-/Peserta/Non Recidential

Form Pre-Registrasi

Data Materi Training

Topik Training : Field Instruments
*Jumlah Peserta Estimasi Jumlah Peserta yang di ajukan
*Nama Peserta Yang Didaftarkan

Personal Data

*Jabatan Jabatan/Divisi/Departement
*Nama Perusahaan
*Alamat Perusahaan
*Email Perusahaan
*Email Alternatif eg: gmail, yahoo, hotmail
*Telepon Kantor
* Harus di isi
TAGS , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,